Braindump2go Shares the Latest Free Official Microsoft 70-412 Exam Training Questions and Answers (351-360)

MICROSOFT OFFICIAL: New Updated 70-412 Exam Questions from Braindump2go 70-412 PDF Dumps and 70-412 VCE Dumps! Welcome to Download the Newest Braindump2go 70-412 VCE&PDF Dumps: http://www.braindump2go.com/70-412.html (392 Q&As)

2015 Microsoft 70-412 Certification Exam is coming! Getting a Laest 70-412 Practice Test is very important for an Exam Candiate! Braindump2go New Updated 70-412 Exam Questions Well Formatted in PDF and VCE versions, providing you convenience and excellence both at the same time! Free Questions and Answer are provided Following:

Exam Code: 70-412
Exam Name Configuring Advanced Windows Server 2012 Services
Certification Provider: Microsoft
Corresponding Certifications: MCSA: Windows Server 2012, MCSE: Desktop Infrastructure, MCSE: Private Cloud, MCSE: Server Infrastructure

Keywords:70-412 Dumps,70-412 Exam Questions,70-412 Book,70-412 E-Book,70-412 PDF,70-412 VCE,70-412 Configuring Advanced Windows Server 2012 R2 Services,70-412 Braindump,70-412 Study Guide,70-412 Practice Tests,70-412 Practice Exams

QUESTION 351
Note: This questions is part of series of questions that use the same or similar answer choices. An answer choice may be correct for more than one question in the series.
Each question is independent of the other questions in this series.
Information and details provided in a question apply only to that question.
Your network contains one Active Directory forest named contoso.com.
The forest contains two child domains and six domain controllers.
The domain controllers are configured as shown in the following table.

You have a trust from contoo.com to another forest named fabrikam.com.
You plan to migrate users from contodo.com to fabrikam.com.
You need to ensure that the users who migrated to fabrikam.com can continue to access shared resources in contoso.com. the solution must not require administrators to modify permissions to shared resources.
What should you use?

A.    Set-ADSite
B.    Set-ADReplicationSite
C.    Set-ADDomain
D.    Set-ADReplicationSiteLink
E.    Set-ADGroup
F.    Set-ADForest
G.    Netdom

Answer: G

QUESTION 352
Your network contains one Active Directory forest named adatum.com.
The forest contains a single domain.
The site topology for the forest is shown in the exhibit.
Each site contain s one domain controller.
You need to ensure that replication between site2 and site4 occurs in 15 minutes or less.
What command should you run? To answer select the appropriate options in the answer area.
Answer Area
New-AdReplicationSiteLink
New-ADReplicationLinkBridge
Set-ADReplicationConnection
Set-ADReplicationSiteLink
Set-ADReplicationSiteLinkBridge
-name
SiteLink3
SiteLink6
SiteLink1, SiteLink2
-SitesIncluded Site2, Site4 -ReplicationFrequencyinMinutes 15 -cost
Answer: Set-ADReplicationSiteLink
Explanation:
(Specifically look up – ReplicationFrequencyinMinutes)
https://technet.microsoft.com/en-us/%5Clibrary/Hh852257(v=WPS.630).aspx

QUESTION 353
Your network contains one Active Directory forest named contoso.com.
The forest contains a single domain.
The domain contains the domain controllers is configured as shown in the following table.
Name Site
DC1  Site1
DC2  Site2
DC3  Site3
DC4  Site4
The replication topology is configured as shown in the following output.
Cost : 100
DistinguishedName : CN=SiteLink1, CN=IP, CN=Inter-Site Transports, CN=Sites, CN=Configuration, Dc=Adatum, DC=com
Name : SiteLink1
ObjectClass : SiteLink
ObjectGUID : e1c8c335-b75f-4612-8a9e-58a0edead21f
ReplInterval : 60
SiteList : {CN=Site4, CN=Sites, CN=Configuration, DC=Adatum, DC=Adatum, DC=com,
CN=Site2, CN=Sites, CN=Configuration, DC=Adatum, DC=Adatum, DC=com}
Cost : 100
DistinguishedName : CN=SiteLink1, CN=IP, CN=Inter-Site Transports, CN=Sites, CN=Configuration, Dc=Adatum, DC=com
Name : SiteLink2
ObjectClass :SiteLink
ObjectGUID : 9516948e-cd56-4a9b-b6ba-cdf3dd7fe0d1
ReplInterval : 60
SiteList : {CN=Site4, CN=Sites, CN=Configuration, DC=Adatum, DC=Adatum, DC=com,
CN=Site2, CN=Sites, CN=Configuration, DC=Adatum, DC=Adatum, DC=com}
Cost : 100
DistinguishedName : CN=SiteLink3, CN=IP, CN=Inter-Site Transports, CN=Sites, CN=Configuration, Dc=Adatum, DC=com
Name : SiteLink3
ObjectClass : SiteLink
ObjectGUID : 07a7a37e-a12c-40c4-8042-f5d2e737b8a9
ReplInterval : 60
SiteList : {CN=Site4, CN=Sites, CN=Configuration, DC=Adatum, DC=Adatum, DC=com,
CN=Site3, CN=Sites, CN=Configuration, DC=Adatum, DC=Adatum, DC=com}
Cost : 400
DistinguishedName : CN=SiteLink4, CN=IP, CN=Inter-Site Transports, CN=Sites, CN=Configuration, Dc=Adatum, DC=com
Name : SiteLink4
ObjectClass : SiteLink
ObjectGUID : 508810dc-30fd-4845-982a-d4552fba2e04 ReplInterval : 45
SiteList : {CN=Site4, CN=Sites, CN=Configuration, DC=Adatum, DC=Adatum, DC=com,
CN=Site2, CN=Sites, CN=Configuration, DC=Adatum, DC=Adatum, DC=com}
You discover that replication between Dc1 and DC3 takes a few hours.
You need to reduce the amount of time it takes to replicate Active Directory changes between DC1 and DC3.
What should you do?

A.    Create a site link that connects Site1 and Site3, has a cost of 350, and replicates every 15 minutes.
B.    Modify SiteLink4 to replicate every 15 minute.
C.    Disable Site Link bridging.
D.    Set the cost of SiteLink4 to 100.

Answer: D

QUESTION 354
Your network contains one Active Directory forest named contoso.com.
The forest contains a single domain.
The domain contains the domain controllers is configured as shown in the following table.
Name Site
DC1  Site1
DC2  Site2
DC3  Site3
DC4  Site4
The forest contains a member server named Server1.
Server1 has an IP address of 172.16.10.66.
The forest has the following Active Directory subnet configuration.
DistinguishedName : CN=172.16.10.0/26, CN=subnets, CN=Sites, CN=Configuration,
Location Dc=Adatum, DC=com
Name : 172.16.10.0/26
ObjectClass : subnet
ObjectGUID : db362a6c-c0a9-4703-aaee-191083ab9ea5
Site : CN=Site1, CN=Sites, CN=Configuration, DC=Adatum, DC=Adatum,
DC=com,
DistinguishedName : CN=172.16.10.64/26, CN=subnets, CN=Sites, CN=Configuration,
Location Dc=Adatum, DC=com
Name : 172.16.10.64/26
ObjectClass : subnet
ObjectGUID : ef101558-3afa-41f1-9c5a-717453436fc1
Site : CN=Site2, CN=Sites, CN=Configuration, DC=Adatum, DC=Adatum,
DC=com,
DistinguishedName : CN=172.16.10.192/26, CN=subnets, CN=Sites, CN=Configuration,
Location Dc=Adatum, DC=com
Name : 172.16.10.192/26
ObjectClass : subnet
ObjectGUID : 33137047-6711-4195-940f-a463bbdab8fb
Site : CN=Site4, CN=Sites, CN=Configuration, DC=Adatum, DC=Adatum,
DC=com,
DistinguishedName : CN=172.16.10.128/26, CN=subnets, CN=Sites, CN=Configuration,
Location Dc=Adatum, DC=com
Name : 172.16.10.128/26
ObjectClass : subnet
ObjectGUID : ef5235ab-759b-4dc8-992a-c5ec1dae97a8
Site : CN=Site3, CN=Sites, CN=Configuration, DC=Adatum, DC=Adatum,
DC=com,
Use the drop down menus to select the answer choice that complete each statement.
Answer Area
If you promote Server1 to a domain controller, its server object will be created in [answer area]
Site1
Site2
Site3
Site4
If you perform an Active Directory search from a domain member that has an IP address of 172.16.10.116, you will attempt to connect [answer area]
DC1
DC2
DC3
DC4
Answer: Site2, DC2
Explanation:
S1 – 172.16.10.66/26, /26 = 63 IP address, Site 2 is located in this subnet.
You be automatically redirected on DC2 on your IP addressing.

QUESTION 355
You have a server named Server1 that runs Windows Server 2012 R2 and uses Windows Server Backup.
You need to identify whether the backups performed on Server1 support bare metal recovery.
Which cmdlet should you run?

A.    Get-OBMachineSetting
B.    GetWBVSSBackupOption
C.    Get-WBPolicy
D.    Get-OBPolicy

Answer: C
Explanation:
Get-OBMachineSetting is for Azure Backup, question asks about Windows Backup
GetWBVSSBackupOption cmdlet doesn’t exist
Get-WBPolicy is for Windows Backup
Get-OBPolicy is for Azure Backup, question asks Windows Backup
https://technet.microsoft.com/en-us/library/Ee706650.aspx

QUESTION 356
You have a cluster named Cluster1 that contains two nodes. Both nodes run Windows Server 2012 R2. Cluster1 hosts a virtual machine named VM1 that runs Windows Server 2012 R2.
You notice that VM1 is marked as being in a critical state in the cluster.
You verify that VM1 is functioning correctly.
You need to ensure that VM1 is no longer marked as being in a critical state.
Which cmdlet should you run?

A.    Remove-ClusterVmMonitoredItem
B.    Remove-ClusterResourceDependency
C.    Reset-ClusterVMMonitoredState
D.    Clear-ClusterNode

Answer: C
Explanation:
Remove-ClusterVmMonitoredItem actually removes the monitoring so nothing will happen
Remove-ClusterResourceDependency – self explanatory has to do with dependencies, not critical state
Reset-ClusterVMMonitoredState – This cmdlet resets the Application Critical state of a virtual machine, so that the virtual machine is no longer marked as being in a critical state in the cluster
Clear-ClusterNode – This cmdlet helps ensure that the failover cluster configuration has been completely removed from a node that was evicted.
https://technet.microsoft.com/en-us/%5Clibrary/Hh847312(v=WPS.630).aspx

QUESTION 357
You run Get-FSRMClassificationule and you receive the following output
ClassificationMechanism : Content Classfier
ContentRegularExpression : {\d{2,}}
ContentString :
ContentStringCaseSensitive :
Description :
Disabled :    False
Flags :
Lastmodified : 4/18/2015 12:59:47 AM
Name    : Rule2
Namespace :    {D:\}
Parameters :    {FSRMClearPropertyInternal = 0}
Property :    Property2
PropertyValue :    Value2
ReevaluateProperty :    Overwrite
PSComputerName :
ClassficationMechanism : FolderClassifier
ContentRegularExpression :
ContentString :
ContentStringCaseSensitive :
Description :
Disabled :    False
Flags :
Lastmodified : 4/15/2015 9:17:16 PM
Name    : Rule1
Namespace :    {D:\}
Parameters :    {FSRMClearPropertyInternal = 0}
Property :    Property1
PropertyValue :    Value1
ReevaluateProperty :    Aggregate
PSComputerName :
You have a file named file1 that is stored on drive D and has the following content “111000000000111111”
You run the classification with all of the rules
Use the drop-down menus top select the answer choice that completes each statement.
File1 has  [answer choice]
Only Property1 set to value1
Only Property2 set to value2
Property1 set to value1 and property2 set to value2
Neither Property1 nor Property2 set
If you modify File1 [answer choice]
Only the value of Property1 is
Only the value of Property2 is
the value of Property1 and Property2 are
Neither the value of Property1 nor the value of Property2 is
Answer:
Only Property1 set to value1
Only the value of Property1 is

QUESTION 358
You network contains one Active Directory domain. The domain contains two Hyper-V Hosts named Host1 and Host2 that run Windows Server 2012 R2. Host1 contains a virtual machine named DC5. DC5 is a domain controller that run Windows Server 2012 R2.
You configure Active Directory to support domain controller cloning for DC5, and then you shut down DC5.
You need to create a clone of DC5 on Host2
What should you run on each Hyper-V Host.? To answer Drag the appropriate commands or cmdlets to the correct Hyper-V hosts. Each command or cmdlet may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
Command and cmdlets
Export-VM
Import-VM
Move-VM
New-ADDCCloneConfigFile
Answer Area
Host1: Command or cmdlet
Host2: Command or cmdlet
Answer: Export-VM, Import-VM
Explanation:
The VM1 is already shutdown, there is no way to configure powershell cmdlets and as per the question AD DC was already prepared. Export-VM on Host1. Then Import-VM on Host2.

QUESTION 359
You network contains one Active Directory domain named adatum.com.
The domain contains a DNS server named Server1 that runs Windows Server 2012 R2.
All domain computers use Server1 for DNS.
You sign adatum.com by using DNSSEC.
You need to configure the domain computers to validate DNS responses for adatum.com records.
What should you configure in Group Policy?

A.    Network List Manager Policies
B.    Network Access Protection (NAP)
C.    Name Resolution Policy
D.    Public Key Policy

Answer: C
Explanation:
https://technet.microsoft.com/en-us/library/Ee649182(v=WS.10).aspx

QUESTION 360
Note: This questions is part of series of questions that use the same or similar answer choices. An answer choice may be correct for more than one question in the series.
Each question is independent of the other questions in this series.
Information and details provided in a question apply only to that question.
Your network contains one Active Directory forest named contoso.com.
The forest contains two child domains and six domain controllers.
The domain controllers are configured as shown in the following table.

You need to add an additional UPN Suffix.
What should you use?

A.    Set-ADSite
B.    Set-ADReplicationSite
C.    Set-ADDomain
D.    Set-ADReplicationSiteLink
E.    Set-ADGroup
F.    Set-ADForest
G.    Netdom

Answer: F
Explanation:
https://technet.microsoft.com/en-us/library/dd391925(v=ws.10).aspx


Braindump2go Offers PDF & VCE Dumps Download for New Released Microsoft 70-412 Exam! 100% Exam Success Guaranteed OR Full Money Back Instantly!

FREE DOWNLOAD: NEW UPDATED 70-412 PDF Dumps & 70-412 VCE Dumps from Braindump2go: http://www.braindump2go.com/70-412.html (392 Q&A

Releated

[December-2023]Real Exam Questions-Braindump2go PL-400 Exam PDF and PL-400 VCE PL-400 367Q Download[Q349-Q357]

December/2023 Latest Braindump2go PL-400 Exam Dumps with PDF and VCE Free Updated Today! Following are some new Braindump2go PL-400 Real Exam Questions! QUESTION 349A company designs a Microsoft Dataverse Custom API to encapsulate business logic in it.The Custom API business logic must be encapsulated in a way that does not allow the business logic behavior […]